Sony SCPH-55006 GT Manual do Utilizador descarregar pdf (Página 7)

Connecting to a TV with component video input connectors

If your monitor or projector has component

video input connectors (Y, CB/PB, CR/PR),

connect your PlayStation

2 console using the

SCPH-10100 G component AV cable (for

PlayStation

2) (sold separately). This will

provide the best picture.

Before connecting

If you connect your PlayStation

2 console to a

television using the component AV cable

without first setting the “Component Video

Out” option under the System Configuration

menu to “Y Cb/Pb Cr/Pr,” the TV screen

might not display properly. Before connecting

your console with the component AV cable,

first use the supplied AV cable (integrated

audio/video) and make sure that the

“Component Video Out” option is set to

“Y Cb/Pb Cr/Pr.”

Notes

• The PlayStation

2 console is not compatible with

HDTV unless the proper software and connecting

cables are used. Refer to the instruction manual

supplied with your TV for details.

• You must use the component AV cable to view DVD

video in progressive scan. If picture quality is reduced

when using progressive scan, try viewing in normal

(interlace) mode. For details, see “Progressive” on page

22.

To audio

input

To AV MULTI OUT

connector

To component

video input

connectors

Connection

This section explains how to connect the

PlayStation

2 console to audio equipment with

digital connectors (such as Dolby Digital

optical (AC-3) output). Using digital receivers

and amplifiers, you can enjoy features such as

multi-channel sound and surround sound.

Connecting to a receiver or

amplifier, “MD (Minidisc)” deck

or “DAT (Digital Audio Tape)”

deck with a digital connector

Use a commercially available optical digital

cable (sold separately) and set “DIGITAL OUT

(OPTICAL)” in the System Configuration menu

to “On” (the default setting).

For details on the System Configuration menu,

see pages 8-9.

Notes

• Refer also to the instructions supplied with the device

to be connected.

• You cannot directly make digital audio recordings of

discs recorded in Dolby Digital format DTS or MPEG

AUDIO format using an MD or a DAT deck.

Connecting to an audio device

with a built-in DTS

Dolby

Digital

or MPEG decoder (DVD

video only)

By connecting to audio equipment with a built-

in DTS Dolby Digital or MPEG decoder (sold

separately), you can play back sound recorded

on DVD videos in Dolby Digital (AC-3) DTS or

MPEG AUDIO format to reproduce the effect

of listening in a movie theater or concert hall.

Connect the device through the DIGITAL OUT

(OPTICAL) connector using an optical digital

cable (sold separately).

Settings for the DVD player on your

PlayStation

2 console

You may need to adjust settings for the DVD

player depending on the devices to be

connected.

For details on using the Setup display, see

pages 20-25.

• When you connect an audio device with a built-

in DTS decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and

then set “DTS” to “On” in the “Audio Setup”

display.

• When you connect an audio device with a built-

in Dolby Digital decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and

then set “Dolby Digital” to “On” in the

“Audio Setup” display.

• When you connect audio equipment with a built

in MPEG decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and

then set “MPEG” to “On” in the “Audio

Setup” display.

Note

Refer to the operating and setup instructions for the audio

device to be connected.

*1 “DTS” and “DTS Digital Out” are trademarks of Digital

Theater Systems, Inc.

*2 Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

Connecting digital audio equipment

MAIN

POWER

AV MULTI OUT

DIGITAL OUT

(OPTICAL)

DIGITAL INPUT

OPTICAL

AC IN

PlayStation®2 console rear

Connected device

Audio device with a

built-in DTS Dolby

Digital or MPEG

decoder

PlayStation

console

Optical digital cable

(sold separately)

Speakers

Note about bouncing effect

Some TVs or monitors may experience a bouncing effect

in their pictures when using the PlayStation

®2 console.

There is nothing wrong with the PlayStation

®2 console

or the way it is manufactured. The problem technically

lies within the television. If you encounter such a

problem with your television/monitor, please contact

our technical support line listed on your warranty card

for technical assistance.

Do not connect your PlayStation

2 console

to a projection TV

Static, non-moving images, such as DVD menus,

configuration displays or paused images may leave a

faint image permanently on the TV screen if left on for

extended periods of time.

Projection TVs, except those of LCD screen types are

more susceptible to this than other types of displays. Do

not operate the console in such a manner that this could

occur. Refer to the instruction manual supplied with

your TV for details.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comentários a estes Manuais

Sem comentários

Sony SCPH-55006 GT Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de DVD Sony SCPH-55006 GT