Sony CDX-F5500 Manual do Utilizador descarregar pdf

SONY CDX-F5500/F5500M (GB,ES,CT) 3-261-958-12 (1)

3-261-958-12 (1)

Cautions

•This unit is designed for negative earth 12 V DC

operation only.

•Do not get the leads under a screw, or caught in

moving parts (e.g. seat railing).

•Before making connections, turn the car ignition

off to avoid short circuits.

•Connect the yellow and red power input leads

only after all other leads have been connected.

•Run all earth leads to a common earth point.

•Be sure to insulate any loose unconnected leads

with electrical tape for safety.

Notes on the power supply lead (yellow)

•When connecting this unit in combination with

other stereo components, the connected car

circuit’s rating must be higher than the sum of

each component’s fuse.

•When no car circuits are rated high enough,

connect the unit directly to the battery.

Parts Iist (1)

•The numbers in the list are keyed to those in the

instructions.

•The bracket 1 and the protection collar 5 are

attached to the unit before shipping. Before

mounting the unit, use the release keys 6 to

remove the bracket 1 and the protection collar 5

from the unit. For details, see “Removing the

protection collar and the bracket (4)” on the

reverse side of the sheet.

•Keep the release keys 6 for future use as they

are also necessary if you remove the unit from

your car.

Caution

Handle the bracket 1 carefully to avoid injuring

your fingers.

Note

Before installing, make sure that the catches on both

sides of the bracket 1 are bent inwards 2 mm. If the

catches are straight or bent outwards, the unit

will not be installed securely and may spring out.

Connection example (2)

Notes (2-A)

• Be sure to connect the earth lead before connecting

the amplifier.

• If you connect an optional power amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

Tip (2-B-

)

For connecting two or more CD/MD changers, the source

selector XA-C30 (optional) is necessary.

Installation/Connections

Instalación/Conexiones

安裝線路連接

FM/AM

Compact Disc

Player

Connection diagram (3)

1 To a metal surface of the car

First connect the black earth lead, then connect the

yellow and red power input leads.

2 To the power aerial control lead or power

supply lead of aerial booster amplifier

Notes

• It is not necessary to connect this lead if there is no

power aerial or aerial booster, or with a manually-

operated telescopic aerial.

• When your car has a built-in FM/AM aerial in the

rear/side glass, see “Notes on the control and

power supply leads.”

3 To AMP REMOTE IN of an optional power

amplifier

This connection is only for amplifiers. Connecting

any other system may damage the unit.

4 To the interface cable of a car telephone

5 To the +12 V power terminal which is energized

in the accessory position of the ignition key

switch

Notes

•If there is no accessory position, connect to the +12

V power (battery) terminal which is energized at

all times.

Be sure to connect the black earth lead to a metal

surface of the car first.

• When your car has a built-in FM/AM aerial in the

rear/side glass, see “Notes on the control and

power supply leads.”

6 To the +12 V power terminal which is energized

at all times

Be sure to connect the black earth lead to a metal

surface of the car first.

Notes on the control and power supply leads

• The power aerial control lead (blue) supplies +12 V DC

when you turn on the tuner.

• When your car has built-in FM/AM aerial in the rear/

side glass, connect the power aerial control lead (blue)

or the accessory power input lead (red) to the power

terminal of the existing aerial booster. For details,

consult your dealer.

•A power aerial without relay box cannot be used with

this unit.

Memory hold connection

When the yellow power input lead is connected, power

will always be supplied to the memory circuit even when

the ignition key is turned off.

Notes on speaker connection

• Before connecting the speakers, turn the unit off.

• Use speakers with an impedance of 4 to 8 ohms, and

with adequate power handling capacities to avoid its

damage.

• Do not connect the speaker terminals to the car

chassis, or connect the terminals of the right speakers

with those of the left speaker.

• Do not connect the earth lead of this unit to the

negative (–) terminal of the speaker.

• Do not attempt to connect the speakers in parallel.

• Connect only passive speakers. Connecting active

speakers (with built-in amplifiers) to the speaker

terminals may damage the unit.

• To avoid a malfunction, do not use the built-in speaker

leads installed in your car if the unit shares a common

negative (–) lead for the right and left speakers.

•Do not connect the unit’s speaker leads to each other.

Note on connection

If speaker and amplifier are not connected correctly,

“FAILURE” appears in the display. In this case, make sure

the speaker and amplifier are connected correctly.

Equipment used in illustrations (not supplied)

Equipo utilizado en las ilustraciones (no suministrado)

插圖中的裝置（非附送）

Rear speaker

Altavoz posterior

後揚聲器

Front speaker

Altavoz frontal

前揚聲器

Power amplifier

Amplificador de potencia

功率放大器

Active subwoofer

Subwoofer activo

有源超低音揚聲器

CDX-F5500

CDX-F5500M

Catch

Rotary commander RM-X4S

Mando rotativo RM-X4S

旋轉式控制器 RM-X4S

× 4

4675

× 2

AUDIO OUT REAR

AUDIO OUT FRONT

BUS AUDIO IN

BUS CONTROL IN

BUS AUDIO IN

CD/MD changer

Cambiador de CD/MD

CD/MD 換碟機

Source selector*

Selector de fuente*

音源選擇器*

XA-C30

not supplied

no suministrado

非附送

1 2 3 4

Resumo do Conteúdo

Página 1 - Compact Disc

Página 2

SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)注意• 本機只能使用負極接地 12 V 直流電源。• 不要使導線夾在螺栓下，或繞掛在移動部件上（如：座椅扶手上）。• 連接線路之前，

Página 3 - 2 Retire el soporte 1

SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)182 mm53 mm41 23511DashboardSalpicadero儀表板512566ccc1Face the hook

Página 4 - B NISSAN

SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)SONY CDX-F5500 (GB,ES,CT) 3-261-958-11 (1)6 A TOYOTAto dashboard/centre consoleal salpicadero/consola centra