Sony CCD-TR7 Manual do Utilizador descarregar pdf (Página 25)

CbtMlttttBn tor MaybMk

Type 2: Connecting to a TV without

Video/Audio Input Jacks

Connecting the camcorder, the RFU adaptor

(RFU-90 UC, supplied), and the TV.

1 Connect the RFU adaptor to the camcorder.

2 Connect the VHF/UHF antenna to the RFU

3 Connect the RFU adaptor to the TV.

4 Set the INPUT/OUTPUT selector on the

camcorder to OUTPUT.

Selection of the TV channel to monitor the

camcorder playback.

1 Set the RF unit selector on the RFU

adaptor to either channel 3 or 4, whichever

is not actWe in your area.

2 Select the same channel on the TV.

Whenever playing back a tape, be sure to set

the TV to the channel that you have selected

in step 2.

Note

With this connection, the sound wilt be in

monaural.

: Signal flow

Type 3: Connection to a TV via a VCR

with an Input Selector

(P-4)

1 Connect the camcorder to the VCR using

the supplied AV conneclirtg cable.

• If your VCR is a monaural type, connect

only the white plug for audio both on the

camcorder and the TV. Do not use the

red plugs.

• You will have stereo sound if your TV

and VTR are stereo, however If one Is

monaural the sound will be monaural.

2 Set the INPirr/OUTPUT selector on the

camcorder to OUTPUT.

3 Set the input selector on the VCR to LINE

eitd set the TVrVTR selector on the TV to

VTR.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 34 35

Sem comentários

Sony CCD-TR7 Manual do Utilizador Página 25