
Configuring Your System
19
To enable or disable the CMOS Clear or onboard VGA Interrupt, perform
the following steps:
1
Remove the system cover (see “Removing the System Cover” on
page 22).
2
Set the switches according to the table show in the diagram (see also
“Configuration Switches” on page 59).
!
Do not change any configuration switch unless directed by an authorized Sony
technician.
O
N
12
KY0059.VSD
Clear password
1
O
N
12
On
2
Enable
Normal
Off
Disable
Configuration switches (SW1)
Switch #
Name
CMOS
AGP_INT
Comentários a estes Manuais