Sony RM-VL700S Manual do Utilizador descarregar pdf (Página 20)

20

Programming signals of another

remote control

— Learning Function (continued)

3 Press and hold the button

on the other remote control,

until the SET indicator

lights and all the

Component Select buttons

flash again.

During data transfer, only the

SET indicator stays lit, and the

Component Select button turns

off.

If the SET indicator flashes

five times

It means that “learning” is

incomplete. Repeat Steps 2 and 3.

4 Repeat Steps 2 and 3 to

“teach” remote control

signals to other buttons.

5 Press SET to finish

“learning.”

Notes

• If you do not perform Learning

steps within 20 seconds at any

point during the process,

Learning mode ends.

• If you do not perform Step 3

within 10 seconds after Step 2, the

Learning procedure returns to

Step 1. Repeat from Step 2 while

the Component Select button

lights.

To cancel “learning,” press SET.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comentários a estes Manuais

Sem comentários