Sony SFM-1 Manual do Utilizador

INSTALLATION MANUAL SFM1 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com

SFM1 Page 10 Installation Manual Wood Stud Location 1. Using a stud finder, locate the 16” or 24” stud centers behind the wall. 2. Once found,

SFM1 Installation Manual Page 11 Marking the Mounting Points 1. Place the bottom portion of the wall plate to the reference line and mark the f

SFM1 Page 12 Installation Manual 3. Use the information below when mounting to the following surfaces (Figure 12): Wood Studs: Drill four (4)

SFM1 nstallation Manual Page 13 Securing the Wall Plate to a Concrete Wall 1. Level and secure the plate to the wall with the reference arrow f

SFM1 Page 14 Installation Manual Securing the Flat Panel to the Wall Mount WARNING: At least (2) qualified personnel are strongly recommended f

SFM1 Installation Manual Page 15 Security Cable 1 23 4

SFM1 Page 16 Installation Manual Technical Specifications 16.000(406.4)16.000(406.4)1.943(49.3)5.000(127)28.000(171.2)CL3.500(88.9)CL5.000(127)

SFM1 Installation Manual Page 17 Warranty Limited Lifetime Warranty This product carries a limited lifetime warranty from ship date against def

SFM1 Page 18 Installation Manual Notes Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 9

PBL-110 Projector Mount Page 2 Installation Manual

SFM1 Installation Manual Page 3 Table Of Contents Warning Statements ...

SFM1 Page 4 Installation Manual Warning Statements WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE (5) TIMES THE WEIGHT

SFM1 Installation Manual Page 5 Parts List NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure t

SFM1 Page 6 Installation Manual Flat Panel Mount Location WARNING: INVERT THE FLAT PANEL PLACE IT ON A SOFT, FLAT SUFRACE TO PREVENT DAMAGE TO

SFM1 Installation Manual Page 7 Figure 3. Mounting Bracket Positioning Figure 4. Mounting Bracket Installation Nylon Spacers, If Applicable (

SFM1 Page 8 Installation Manual NOTE: The mounting guides are designed with a center viewing guide on the side of them. There will be a “notch”

SFM1 Installation Manual Page 9 Griplates™ 1. The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that the flat panel requi