Sony RDP-X60iP Manual do Utilizador descarregar pdf

RDP-X60iP_4-278-207-32(1)_EU8CEK

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation of

the apparatus with newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the

apparatus.

Do not install the appliance in a confined space, such as

a bookcase or built-in cabinet.

Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.

The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even

if the unit itself has been turned off.

The nameplate and important information concerning

safety are located on the bottom exterior of the main unit

and on the surface of the AC power adaptor.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same type.

Notice for customers: the following information is

only applicable to equipment sold in countries

applying EU directives

The manufacturer of this product is Sony Corporation,

1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters,

please refer to the addresses given in separate service or

guarantee documents.

Hereby, Sony Corp., declares that this equipment is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC. For details,

please access the following URL:

http://www.compliance.sony.de/

On Copyrights and Licenses

The Bluetooth word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other trademarks and

trade names are those of their respective owners.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are

trademarks of Apple Inc., registered in the U.S. and other

countries.

“Made for iPod,” and “Made for iPhone” mean that an

electronic accessory has been designed to connect

specifically to iPod or iPhone, respectively, and has been

certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of

this device or its compliance with safety and regulatory

standards. Please note that the use of this accessory with

iPod or iPhone may affect wireless performance.

Use of this radio equipment is not allowed in the

geographical area within a radius 20km from the centre

of Ny-Alesund, Svalbard in Norway.

Features

Wireless Music Streaming

Compatible with iPod and iPhone

MEGA BASS

Wireless remote commander supplied



Precautions

To disconnect the AC power cord (mains lead), pull it

out by the plug, not the cord.

Since a strong magnet is used for the speaker, keep

credit cards using magnetic coding or spring-wound

watches, CRT-based TVs, or projectors, etc., away from

the unit to prevent possible damage from the magnet.

Do not leave the unit in a location near a heat source such

as a radiator or airduct, or in a place subject to direct

sunlight, excessive dust, mechanical vibration, or shock.

Allow adequate air circulation to prevent internal heat

build-up. Do not place the unit on a surface (a rug, a

blanket, etc.) or near materials (a curtain) which might

block the ventilation holes.

Should any solid object or liquid fall into the unit,

unplug the unit and have it checked by qualified

personnel before operating it any further.

Do not handle the unit with wet hands.

Do not place the unit anywhere near water.

NOTES ON LITHIUM BATTERY

Wipe the battery with a dry cloth to assure a good contact.

Be sure to observe the correct polarity when installing

the battery.

Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Disposal of Old Electrical & Electronic

Equipment (Applicable in the European

Union and other European countries

with separate collection systems)

This symbol on the product or on its packaging indicates

that this product shall not be treated as household waste.

Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about recycling

of this product, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Applicable accessory: Remote Commander.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly, you

will help prevent potentially negative consequences for

the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with

an incorporated battery, this battery should be replaced

by qualified service staff only.

To ensure that the battery will be treated properly, hand

over the product at end-of-life to the applicable

collection point for the recycling of electrical and

electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.



On Bluetooth communication

Bluetooth wireless technology operates within a range

of about 10 meters.

Maximum communication range may vary depending

on obstacles (human body, metal, wall, etc.) or

electromagnetic environment.

Steel cabinet

Limited performance

Optimal performance

The unit

The following conditions may affect the sensitivity of

Bluetooth communication.

– There is an obstacle such as a person, metal, or wall

between this unit and iPod.

– A device using 2.4 GHz frequency, such as a wireless

LAN device, cordless telephone, or microwave oven,

is in use near the unit.

– The unit is installed on a shelf made of steel.

Because Bluetooth devices and wireless LAN

(IEEE802.11b/g/n) use the same frequency, microwave

interference may occur and resulting in communication

speed deterioration, noise, or invalid connection if this

unit is used near a wireless LAN device. In such as case,

perform the following.

– Use this unit at least 10 m away from any wireless

LAN device.

–

If this unit is used within 10 m of a wireless LAN

device, turn off the wireless LAN device.

– Install this unit and iPod as near to each other as

possible.

Microwaves emitting from a Bluetooth device may

affect the operation of electronic medical devices. Turn

off this unit and iPod in the following locations, as it

may cause an accident.

– where inflammable gas is present, in a hospital, train,

airplane, or a petrol station

– near automatic doors or a fire alarm

This unit supports security capabilities that comply

with the Bluetooth standard to provide a secure

connection when the Bluetooth wireless technology is

used, but security may be insufficient, depending on

the setting. Be careful when communicating using

Bluetooth wireless technology.

We do not take any responsibility for leakage of

information during Bluetooth communication.

Connection with all Bluetooth devices cannot be

guaranteed.

– A device featuring Bluetooth function is required to

conform to the Bluetooth standard specified by

Bluetooth SIG, Inc. and be authenticated.

– Even if the connected device conforms to the above

mentioned Bluetooth standard, some devices may

not be connected or work correctly, depending on

the features or specifications of the device.

Depending on the device to be connected, it may

require some time to start communication.

Note





In the Operating Instructions, “iPod” is used as a

general reference to functions on an iPod, iPhone or

iPad, unless otherwise specified by the text or

illustrations.

If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.



Power sources

Preparing a power source

1 Connect the AC power cord (supplied) to the AC

power adaptor (supplied).

2 Connect the AC power adaptor to the DC IN 20V

jack on the back of this unit firmly and plug it into a

wall outlet.

AUDIO IN DC IN 20V

AC power adaptor AC power cord

To wall outlet

Note on the AC power adaptor

Use the supplied Sony AC power adaptor only. The polarity of the

plugs of other manufactures may be different. Failure to use the

supplied AC power adaptor may cause the unit to malfunction.

Preparing the remote

commander

Before using the remote commander for the first time,

remove the insulation film.

When to replace the battery

With normal use, the battery (CR2025) should last for

about 6 months. When the remote commander no longer

operates the unit, replace the battery with a new one.

the  side facing up



Notes

Do not attempt to charge the battery.

If you are not going to use the remote commander for a long time,

remove the battery to avoid any damage that may be caused by

leakage and corrosion.



4-278-207-32(1)

Personal Audio

Docking System

RDP-X60iP

Operating Instructions

1 2

Resumo do Conteúdo

Página 1 - Docking System

RDP-X60iP_4-278-207-32(1)_EU8CEKWARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the ri

Página 2 - To external

RDP-X60iP_4-278-207-32(1)_EU8CEKOperationsBluetooth indicatorMEGA BASSindicatorRemote sensorDocking TrayVOLUME + (VOL + on the remote commander) and 