Sony STR-DN840 Manual do Utilizador descarregar pdf (Página 114)

114

US

• Erase the pairing registration

information of a Bluetooth device

(page 73) and perform the pairing

operation again.

The sound skips or fluctuates, or the

connection is lost.

• The receiver and the Bluetooth device

are too far apart.

• If there are obstacles between the

receiver and your Bluetooth device,

remove or avoid the obstacles.

• If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

The sound of your Bluetooth device

cannot be heard on this receiver.

• Turn up the volume on your Bluetooth

device first, and then adjust the volume

using

2 +/– (or MASTER

VOLUME on the receiver).

Severe hum or noise

• If there are obstacles between the

receiver and your Bluetooth device,

remove or avoid the obstacles.

• If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

• Turn down the volume of the

connected Bluetooth device.

The Control for HDMI function does not

work.

• Check the HDMI connection

(page 23).

• Make sure “Control for HDMI” is set

to “On” in HDMI Settings menu

(page 91).

• Make sure the connected equipment is

compatible with the Control for HDMI

function.

• Check the Control for HDMI settings

on the connected equipment. Refer to

the operating instructions of the

connected equipment.

• If you unplug the HDMI cable or

change the connection, repeat the

procedures of “Preparing for the

“BRAVIA” Sync” (page 77).

• When “Control for HDMI” is set to

“Off”, the “BRAVIA” Sync does not

work properly, even if the equipment

is connected to the HDMI IN jack.

• The types and the number of

equipment which can be controlled by

the “BRAVIA” Sync are restricted in

the HDMI CEC standard as follows.

– Recording equipment (Blu-ray Disc

recorder, DVD recorder, etc.): up to

3 equipment

– Playback equipment (Blu-ray Disc

player, DVD player, etc.): up to 3

equipment

– Tuner-related equipment: up to 4

equipment

– AV receiver (audio system): up to 1

equipment

The remote control does not function.

• Point the remote control at the remote

control sensor on the receiver (page 8).

• Remove any obstacles in the path

between the remote control and the

receiver.

• Replace all the batteries in the remote

control with new ones, if they are

weak.

• Make sure you select the correct input

on the remote control.

“BRAVIA” Sync (Control

for HDMI)

Remote control

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 123 124

Comentários a estes Manuais

Sem comentários