Sony STR-DN840 Manual do Utilizador descarregar pdf (Página 74)

74

US

4 Perform pairing on the Bluetooth

device to detect this receiver.

For details, refer to the operating

instructions of your Bluetooth device.

A list of detected devices may appears

on the Bluetooth device display

depending on the type of Bluetooth

device. This receiver is displayed as

“STR-DN840”.

When establishing a connection with this

receiver, select the audio profile (A2DP,

AVRCP) at the Bluetooth device. If the

Bluetooth device does not support the

AVRCP profile, you cannot perform

playback or other operations with this

receiver (page 73).

5 Select “STR-DN840” on the

Bluetooth device display.

If “STR-DN840” is not displayed,

repeat from step 1.

6 If passkey* is required on the

display of the Bluetooth device,

enter “0000”.

7 Once pairing is completed,

connect this receiver with the

Bluetooth device.

Depending on the device, connection

is automatically made along with the

pairing. Once the connection is

established, the device name appears

and “BT” lights up on the display

panel.

* Passkey may be called “Passcode”, “PIN code”,

“PIN number” or “Password”.

• The receiver only supports numerical passkey

up to 4 digits.

• You can pair up to 9 Bluetooth devices with this

receiver. If 10th Bluetooth device is paired, the

least recently connected device will be replaced

by the new one.

• To pair with other Bluetooth devices, repeats

steps 1 to 6.

To cancel pairing operation

Hold down BLUETOOTH after step 3.

“CANCEL” appears on the display panel.

You can operate a Bluetooth device by

connecting the receiver and a Bluetooth

device using AVRCP.

Check the following before playing music:

– The Bluetooth function of the Bluetooth

device is turned on.

– Pairing has been completed.

1 Press BLUETOOTH to select

Bluetooth function.

The receiver automatically connects to

the last connected Bluetooth device.

If you cannot connect with a last

connected Bluetooth device, press

BLUETOOTH on the receiver.

Once the connection is established,

proceed to step 3.

2 Establish a connection from the

Bluetooth device.

For details, refer to the operating

instructions of your Bluetooth device.

3 Start playback from the Bluetooth

device.

You can also press N on the remote

control.

4 Adjust the volume.

Press 2 +/– (or turn the MASTER

VOLUME knob on the receiver).

Depending on the type of Bluetooth device,

you can adjust the volume using the controls

of the Bluetooth device.

• Once the connection is established, the device

name appears on the TV screen and “BT” lights

up on the display panel.

Note

Notes

Playing music of a

Bluetooth device

Note

Notes

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 123 124

Comentários a estes Manuais

Sem comentários